Guide · 4 min read
Ski Brake Width, Explained (and How to Match It to Your Skis)
Published 2026-10-12 · PisteIndex Editorial
Brake width is the binding spec everyone forgets to check, and it's the one that bites hardest when you get it wrong. Every binding has a pair of spring-loaded arms, called brakes, that drop down when a ski releases. Their whole job is stopping a freed ski from rocketing down the hill at someone. The width rating is exactly what it sounds like: how wide a ski those arms can spread over without hitting the edges.
How close is close enough?
Match the brake to the waist width of the ski, plus a little headroom. Somewhere in the 10 to 15 mm range above waist width is the window most ski techs work with.
Go too narrow and the brakes physically can't clear the ski. They jam partway out, and the only fix is bending the arms wider. Most binding makers discourage that, and some will tell you it messes with the release settings. Go too wide and the binding mounts fine, but the arms hang past the edge of the ski. In trees, couloirs and landings, those sticky-out arms catch on things, and a caught brake can pop your binding open when you least want it to.
If you're stuck between two sizes, take the bigger one. A few millimetres of overhang never hurt anyone. Undersized brakes either don't fit or need bending, and bending is its own headache.
An example: the Blizzard Rustler 9
The Blizzard Rustler 9 runs a 96 mm waist. Add headroom to that and you land around 100 to 110 mm brakes. Mount it with 115s and it will ski, but the arms stick out past the edge noticeably. Order 91 mm brakes because they were in stock, and you're making a second trip to the shop.
The same math works for every ski in our catalogue. Find the waist width on any product page, add 10 or so millimetres, and that's your brake size.
Ordering bindings online?
Brake size is usually tucked into the model name, like "Marker Griffon 13 ID 100mm". It's easy to order the binding you want and miss the number at the end of the listing. That five-second check is cheaper than a return, and a lot cheaper than bent brakes. If you're not sure where to start, our Brake Width Matcher runs the check for you across the whole catalogue.
Cheat sheet
- Brake width should sit within about 10-15 mm of your ski's waist width.
- Slightly too wide is fine. Too narrow is not.
- Check the brake size before you buy, not when the box shows up.